Example : RAM in desktop computers, laptops, phones, DRAM, SDRAM etc.
ROM (Read Only Memory) is a built in memory where the data can only be read, not written to.
ROM is a non-volatile memory.
The ROM is sustained by a small long-life battery in your computer.
What is RAM and ROM?
Read-only memory, or ROM, is a form of data storage in computers and other electronic devices that can not be easily altered or reprogrammed. RAM is referred to as volatile memory and is lost when the power is turned off whereas ROM in non-volatile and the contents are retained even after the power is switched off.
What is difference between RAM and ROM with example?
A ROM chip is used primarily in the startup process of a computer, whereas a RAM chip is used in the normal operations after the operating system is loaded. For example, a ROM chip is often used to store the BIOS program on the computer motherboard.
What is ROM used for?
Short for read-only memory, ROM is a storage medium that is used with computers and other electronic devices. As the name indicates, data stored in ROM may only be read. Unlike RAM (random access memory), ROM is non-volatile, which means it keeps its contents regardless of whether or not it has power.
What is Ram short answer?
RAM (pronounced ramm) is an acronym for random access memory, a type of computer memory that can be accessed randomly; that is, any byte of memory can be accessed without touching the preceding bytes. RAM is found in servers, PCs, tablets, smartphones and other devices, such as printers.
What is stored on RAM?
Alternatively referred to as main memory, primary memory, or system memory, RAM (random-access memory) is a hardware device that allows information to be stored and retrieved on a computer. RAM is usually associated with DRAM, which is a type of memory module. New users often confuse RAM with disk drive space.
What is stored in ROM?
Read-only memory (ROM) is a type of storage medium that permanently stores data on personal computers (PCs) and other electronic devices. It contains the programming needed to start a PC, which is essential for boot-up; it performs major input/output tasks and holds programs or software instructions.