Quick Answer: Why Do We Do Preventive Maintenance?

Preventive maintenance is an important part of facilities management.

The goal of a successful preventive maintenance program is to establish consistent practices designed to improve the performance and safety of the equipment at your property.

Equipment downtime is decreased and the number of major repairs are reduced.

What does preventive maintenance mean?

Preventive maintenance (or preventative maintenance) is maintenance that is regularly performed on a piece of equipment to lessen the likelihood of it failing. It is performed while the equipment is still working so that it does not break down unexpectedly.

How do you do preventive maintenance?

How to Set Up a Preventive Maintenance Plan

  • Get The Right People on Board.
  • Set Goals For Your Preventive Maintenance Plan.
  • Inventory The Equipment and Assets.
  • Make Decisions.
  • Get to Know the Owner’s Manuals.
  • Schedule For Long Term Preventive Maintenance.
  • Schedule For Short Term Preventive Maintenance.
  • Train, Train, Train!

Why do we need a maintenance?

The need of maintenance is based on the actual or imminent fail. Ideally, maintenance is carried out to keep equipment and systems running efficiently during at least its usual life cycle. As such, practical functioning of equipment is a function based on time.

What are the 4 types of maintenance?

Four general types of maintenance philosophies can be identified, namely corrective, preventive, risk-based and condition-based maintenance.

What are the examples of preventive maintenance?

In practice, a preventive maintenance schedule may include things such as cleaning, lubrication, oil changes, adjustments, repairs, inspecting and replacing parts, and partial or complete overhauls that are regularly scheduled.

What are the two types of preventive maintenance?

As such, preventative maintenance types fall into five basic areas:

  1. interval-based preventative maintenance.
  2. meter-based maintenance (equipment demand)
  3. breakdown maintenance.
  4. predictive maintenance.
  5. run-to-fail.

What are the 3 types of maintenance?

Five types of maintenance are in fact recurrent in the industry: corrective, preventive, condition-based, predictive and predetermined. These concepts are not always easy to understand or are not well-known by certain people, that’s why they need to be cleared up.

What is the purpose of preventive maintenance?

Preventive maintenance refers to planned maintenance designed to prevent equipment from breaking down. Taking active steps to keep equipment in good condition is usually more efficient than repairing or replacing equipment after it breaks or fails.

What is a maintenance checklist?

A maintenance checklist is a document which contains a few items to be checked or reviewed for maintenance (e.g. vehicle, appliance, etc). It also points out the things which have been reviewed (usually marked) in order to avoid reviewing the same item more than once.

Which type of maintenance is most expensive?

Corrective maintenance

What are the classification of maintenance?

Maintenance classification

Maintenance is classified into four types which are as follows: Corrective maintenance: Corrective maintenance is basically provided in order to fix the error in a program. Corrective maintenance is done in situation when there is the fault in the design.

How often should someone do a preventive maintenance and procedures?

When to Schedule Preventive Maintenance

In the first case, you’ll determine that a particular piece of equipment should be inspected, cleaned, or maintained every so many months or years. This is akin to changing the oil in your car every three months or your furnace filter every six months.

What is preventive maintenance checklist?

A Preventive Maintenance Checklist. 4/18/18. Preventive maintenance is defined as regularly scheduled inspections, tests, servicing, replacements, repairs and other tasks intended to help reduce the impact and frequency of equipment failures.

What are the steps involved in preventive maintenance?

Six Steps to Design a Preventive Maintenance Program

  • Step 1 – PM Procedure Design: Doing the Effective Things.
  • Step 2 – PM Procedure Scheduling: Efficient Use of People and Resources.
  • Step 3 – PM Lubrication Engineering.
  • Step 4 – PM Training: Back on the Chain Gang.
  • Step 5 – PM Program Management Plan.
  • Step 6 – Communicate, Communicate, Communicate.